← Back to Joel & Nanz
40GBASE-SR4 QSFP+ InfiniBand FDR10 Optical Transceiver Module Compatible with NVIDIA/Mellanox MC2210411-SR4E for Switch-IB 2 Switches and ConnectX-5 HCA 850nm 150m DDM MPO-12/UPC MMF
64.14 CAD
In-data-center 40GbE or InfiniBand FDR10 links up to 150m on Mellanox/NVIDIA gear over multimode MPO fiber.
Buy on Amazon.ca →You'll be taken to Amazon.ca to complete your purchase.
About this product
Key features
- 40GBASE-SR4 QSFP+ Optical Transceiver Module, Built-in high performance Chip, Max. Power Consumption 1.2W enable Prolonged Service Life, Commercial Temperature Range 0 to 70°C (32 to 158°F)
- Tested in Targeted Switch Devices for Superior Performance, Quality, and Reliability. We owns compatibility LAB facilities to meet the EEPROM coding and writing requirements with various brands of the latest and advanced networking equipments to ensure the reliability.
- Built-in Real Time Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
- 4 independent full-duplex channels, Up to 11.2Gbps per channel bandwidth. Support 40G to 4x 10G Breakout Application and Interface Interoperability. High-Speed Electrical Interface Compliant to IEEE 802.3ba
- Hot Pluggable QSFP+ Form Factor, Compliant to SFF-8436 and QSFP MSA and RoHS
Affiliate disclosure: This product links to Amazon. As an Amazon Associate, Joel & Nanz Inc. earns from qualifying purchases at no extra cost to you.
Specifications
- Type
- 40GBASE-SR4 QSFP+ transceiver
- Fiber
- MMF
- Reach
- Up to 150m over OM3/OM4 multimode
- Speed
- 40G (InfiniBand FDR10 / 40GbE)
- Connector
- MPO-12/UPC
- Wavelength
- 850nm
- Diagnostics
- DDM/DOM
- Compatibility
- NVIDIA/Mellanox MC2210411-SR4E compatible
Pros
- ✓40G short-reach over multimode, up to 150m on OM3
- ✓Mellanox MC2210411-SR4E compatible
- ✓Cost-effective for 40GbE/FDR10 in-data-center links
- ✓DDM optical monitoring supported
Cons
- ×MPO-12 multimode cabling required
- ×40G/FDR10 is an older speed tier
- ×Not for single-mode/long-haul
FAQ
How far can this SR4 module reach?
Up to roughly 150m on OM3 multimode fiber (more on OM4) via an MPO-12 trunk.
What's FDR10?
FDR10 is a Mellanox InfiniBand rate (~40Gb/s effective) that this QSFP+ supports alongside 40GbE Ethernet.
What connector does it use?
MPO-12/UPC multimode; 8 of the 12 fibers carry the 4 TX + 4 RX lanes.