← Back to Joel & Nanz
100G QSFP28 SR4 for Juniper JNP-QSFP-100G-SR4 100GBASE-SR4 QSFP28 Transceiver Module MMF 850nm 100m MTP/MPO DOM
91.40 CAD
Affordable in-data-center 100G short-reach links up to 100m on Juniper-compatible switches using multimode MPO fiber.
Buy on Amazon.ca →You'll be taken to Amazon.ca to complete your purchase.
About this product
Key features
- 【Wide Compatibility】It's fully compliant and compatible for Juniper networks IEEE 802.3bm 100GBASE-SR4 and CAUI-4 standards, coding as Juniper JNP-QSFP-100G-SR4
- 【100G QSFP+ SR4】100GBASE-SR4 QSFP+ transceiver module, 12 Fibers MTP/MPO Male connectors, up to 100m on OM4 Multimode Fiber (MMF) and 70m on OM3 MMF, short distance transmission over multimode fiber 850nm, 4 independent full-duplex channels, Hot Pluggable, DDM Built-in digital diagnostic functions, Class 1 FDA Laser Safety and RoHS Compliant. 0°C to 70°C(32 to 158°F)
- 【Breakout 4x25G】100GBASE-SR4 QSFP+ transceivers allow 4x25G transmission connectivity by using MTP Type B cables to breakout 100GBASE-SR4 QSFP28 to 4 x 25GBASE-SR SFP28 optical interfaces, it refers to running multiple ports at lower speeds.
- 【Connectors&Cables】The 100GBASE-SR4 QSFP+ transceivers adopt MTP/MPO-12 Male connectors and use 12 fibers multimode MTP Type B trunk cables for direct connection, as for 25G to 100G network upgrade connection, 8 fibers OM4 MTP-LC Type B harness cable can be applied
- 【Easy to install】It supports real-time configuration, plug and play, hot pluggable sfp footprint. It doesn't require any setup or installation for either device. It greens up immediately and connects right away. When install sfp, please rotate the latch down at a 90 degree to unlock your sfp transceiver. Attention not to look directly into the sfp interface when it's plugged in the network device
Affiliate disclosure: This product links to Amazon. As an Amazon Associate, Joel & Nanz Inc. earns from qualifying purchases at no extra cost to you.
Specifications
- Type
- 100GBASE-SR4 QSFP28 transceiver
- Fiber
- MMF
- Reach
- Up to 100m over OM4 multimode
- Speed
- 100GbE
- Connector
- MTP/MPO-12
- Wavelength
- 850nm
- Diagnostics
- DOM
- Compatibility
- Juniper JNP-QSFP-100G-SR4 compatible
Pros
- ✓Cost-effective 100G short-reach for Juniper-compatible switches
- ✓Up to 100m on OM4 multimode covers most in-data-center runs
- ✓MTP/MPO-12 parallel optics with DOM monitoring
- ✓Affordable per-module price
Cons
- ×Multimode reach limited (~70m OM3 / 100m OM4)
- ×Requires MPO-12 multimode trunk cabling
- ×Not for single-mode/long-haul
FAQ
How far can it reach?
Up to ~70m on OM3 and 100m on OM4 multimode fiber via an MTP/MPO-12 trunk.
Which switches is it for?
Juniper, coded to match JNP-QSFP-100G-SR4; broadly used on 100GBASE-SR4 ports.
What connector and fiber type?
MTP/MPO-12 multimode (OM3/OM4), using 8 of 12 fibers for the 4 TX + 4 RX lanes.